Overview of the hottest acrylic acid Market in the

2022-08-14
  • Detail

Overview of the acrylic acid Market in the United States

on July 23, 2002, the current acrylic acid production capacity in the United States is 2.895 billion lb/a (crude acrylic acid), The manufacturer and production capacity are shown in the table below: 100 million lb/a company address capacity BASF Tektronix strengthened its organizational leadership and promoted it at a high level 4.85 in Freeport, Texas acryl, Pasadena, Texas 2.65celanese, Clearlake, Texas 6.40dow chemical, Taft, Louisiana 2.40rohm and haas/stohass, delpat, Texas 12.65, a total of 28.95. The demand for acrylic acid in the United States in 1999 was 2.183 billion lb. The consumption composition is: polyacrylic acid and its salts (including super absorbent polymers, detergents, water treatment agents and dispersants) 34%, n-butyl acrylate 32%, ethyl acrylate 18%, methyl acrylate and special acrylate 7%, others 3%

most acrylic acids are consumed as polymers. In the past, acrylic acid was mainly used to produce acrylates, but the current increase in the demand for superabsorbents (used for paper towels and sanitary products) has increased the demand for homopolyester acrylate (n-butyl acrylate) polymers. In addition, acrylic acid can also be directly used as various polymer components. From 1995 to 2000, the consumption of acrylic acid increased at an average annual rate of 6.4%

polyacrylic acid (PAA) and n-butyl acrylate once accounted for the largest part of the growth. The average growth rate of PAA is 6.5%, which is mainly driven by the strong demand for high water absorption ◆ natvar brand high-precision silicone extruded medical catheter polymer. Acrylic acid accounts for about 80% - 85% of the raw materials used in the production of superabsorbent polymers

due to the recent economic depression in the United States, the average annual growth rate of acrylic acid demand has decreased from more than 6% to nearly 4%. Therefore, the overall market situation has been presenting for you. The following is to introduce the progressiveness and performance characteristics of 1 manhole cover pressure fatigue testing machine. Although the product price increased by about 5% in 2001, the price of raw propylene increased by 15%, so the profit of acrylic acid decreased

it is estimated that by 2004, the demand for acrylic acid in the United States will increase at an average annual rate of 4.2%, and is expected to reach 2.6 billion lb, with an output value of 1.7 billion US dollars. The demand for PAA for superabsorbent polymers is expected to increase by 5.5% annually. Manufacturers use paper towels with high water absorption properties. The increase in output and export volume of these products (especially to Canada and Mexico) will lead to strong demand growth. The consumption of acrylate (n-butyl acrylate), the largest commodity, will increase at an average annual rate of 4.2%. The growth of this sector will be driven by its use of coatings, adhesives, inks and impact modifiers. Due to the new production capacity of acrylic acid increased in recent years, the supply will be more than enough

Copyright © 2011 JIN SHI